|
Frameless shower screens and doors.
The Most Minimal System On The Planet.
|
 |
"A made to measure shower screen at a stock price".
Totally frameless shower doors, shower screens and over-bath screens
All-British 6, 8 or 10mm thickness
For conventional trays, tiled or vinyl wetfloors
Design your own made to measure modular shower screen system
Glass partition walls for steam rooms
BS 6206 Class A toughened
For more information visit www.betascreens.com
Click to view Beta Screens brochure
Distinguished by an uncompromising full glass look. Minimalist luxury at an affordable price.
The effect is fully frameless with three edge clamps or optional slim wall channel. This achieves clean, pure sight lines that harmonise with traditional or contemporary features and fittings.
Create a wetroom by forming the panels in any format or simply stand the screen onto a tray.
|
 |
HEIGHT
Stock height is 2000m although most heights are available at no extra cost. Angled tops and notches are our speciality.
THICKNESS
6, 8, 10mm with 3-angle polished edge
GLASS FINISH
Clear or satinised (sandblasted effect - see picture right). Sandblasted stripes, motifs or logos are easily achieved.
HARDWARE FINISH
Chrome or polished aluminium
WIDTHS
200mm through to 1400mm and over, in 100mm incements.
Maximum width 3500mm. Specials at no extra cost.
CONFIGURATIONS
Eleven options to suit corners, alcoves, cubicles etc.
Ask for brochure.
|
 |
|
WALL FIXING
Various options: |
Three edge clamps
10mm adjustment |
Minimal 17mm channel c/w gasket
6mm adjustment |
Slim compensator profile
22mm adjustment |
Screen fixing bracket
|
 |
 |
 |
 |
 |
Flush Mounting Channel
Can be used alone on a floor or wall instead of the slim (15 x 17 mm) edge channel or use together for discreet flush-glazed floor to ceiling aesthetic.
FMC 130 needs depth into tile of 13mm.
FMC 225 needs depth into tile or ceiling of 22.5mm.
C/W gasket for 6 or 8mm glass but no gasket for 10mm (use silicone)
Length 2000mm
|
 |
90 degree Bracket Brace
Compact solution will brace a short 100mm screen up to much
wider ones. Ideal for where a door is hung from a narrow side screen. |
|
MOBILITY/HEALTHCARE
See "Shower Doors" heading below
|
FLOOR FIXING ONTO TILED WETFLOOR
Toe Pedestal - The toe pedestal provides a clear drainage gap of 17mm onto the tiles, preventing grime & limescale. A 3mm pin locates in a blind hole drilled into the floor, then silicone the pedestal down. This avoids a screw penetrating the membrane. Set the screen 30mm inboard onto the slope so water drips away. The height adjustment - 10mm in-built.
65mm Toe Pedestal - diameter 19mm
 |
 |
 |
Three alternative choices:
Silicone the screen onto the tray or the tiling
Use the same Slim Edge Channel as the wall ( 15 x 17mm )
but no end cap is available - see picture
 |
FLOOR FIXING ONTO A TRAY
3 options
Silicone to Tray
Translucent bottom seal
Slim Edge Channel (see picture left)
|
BRACING/STEADYING SOLUTIONS
Top Brace: Three are available in ultra-slim 8mm diameter - a straight 1200, bent 800mm or Interlinking. (See pictures below)
|
|
|
|
 |
|
|
Ceiling Fixing: Floor to ceiling 800-2600mm full height. Short ceiling fix only 100-1170mm.
|
FLOOR TO CEILING POLE
A very secure solution for the outer edge of a frameless shower screen.Also provides a clear sight line for the visually impaired.
No drilling of glass required simply clamps onto any screen of 6, 8,10mm.
Polished stainless steel
44mm diameter x 3000mm, easily cut to length
c/w hardened cobalt drill for attaching clamps to pole
|
 |
 |
 |
BLADE CEILING FIXING
Mounted from the top horizontal edge a very rigid ceiling fixing that virtually eliminates flexing whilst also being contemporary & minimal
looking.
Ceiling bracket can be mounted to a flat or sloping ceiling of any angle, can also be inserted through ceiling into joist cavity with hidden bracket.
- Simple to reduce in length
- Specify 6,8, or 10mm screen
Note: Ceiling bracket can be reversed.
|
 |
 |
 |
 |
 |
- Measures 40 x 8mm
- Lengths 275 & 1145
|
COMMUNAL SHOWERS & SPECIAL NEEDS
Made to architect's specification for hotels, spas, outdoor pursuits, mobility healthcare, leisure centres, sports changing rooms.
ANGLED TOPS, NOTCHES, CUT-OUTS ETC
Fax or e-mail a sketch for a quotation.
HARDWARE CONTENTS
A typical single screen kit includes:
3 edge clamps or slim channel wall fixing
1 x 17mm toe pedestal
1 x 800mm bent top brace
1 x 1200mm straight top brace
|
TRANSLUCENT SEALS
Side Edge Seals: No seal is needed with the slim wall channel as the fixture is tight back to the wall. The edge clamps provide a 17mm gap which can be partially filled with a Flap Seal. Unless water is playing directly on to the gap, the minimal splashing will drain slowly away below the bottom gap provided by the toe pedestal (if fitted). Seals are 95% effective only.
|
 |
 |
 |
Bottom Edge Seals: This drip seal is used with or without Threshold Bar(see drawing below).
Threshold Bar: Versatile floor barrier, use below a door or screen to prevent water- creep. 900 or 1800mm |
 |
 |
 |
Universal Screen Seal
Multi purpose refurb seal for any shower screen.
Translucent flexible flap seal bonds with sealant supplied to the inside or outside of screen or shower door.
Very high grade Anti-fungal product.
1000mm lengths.
For gaps up to 18mm
| 15mm wide | £15.30 inc carr. |
| 25mm wide | £17.90 inc carr. |
|
15mm wide Universal Screen Seal |
25mm wide Universal Screen Seal |
| N.B Channel Not Included |
GLASS PROTECTION - Showerguard
The most revolutionary & durable labour saving product available in glass protection, using nano technology.
Protects for 7 years against the adhesion of limescale deposits & contaminants from soapy water enabling easier cleaning of glass inside or outside.
Bonds permanently onto ceramic or glass via a strong chemical reaction.
Much easier cleaning, sheds dirt, grime & toxing.
Preserves long – term transparency
Resists chemical attack from soap products & limescale
Squeegee
Scoop up stray water with this handy chromed tool, or clean the shower/walls.
Complete with neat wall hook.
WARRANTY
Lifetime guarantee on all hardware parts only.
|
 |
Internal Glass Doors
|
 |
INTERNAL GLASS DOORS
All British 6mm clear toughened, kite marked.
Polished edges.
Satinised obscure finish at extra cost.
Two stainless steel lift–off hinges.
Lever latch locking handle set.
Finished in brushed effect soft polished gunmetal.
Fits a modern 6’6 x 2’6 door frame with 12 x 38mm rebate.
C/W stainless screws and door stop.
|
 |
 |
| |
|
